SAV 2022_PANORAMIQUE-1.png

MAINTENANCE

Our offer

SERVICES-Intervention-sur-site.png

ON SITE INTERVENTIONS

In case of problem:

  • Emergency intervention:
  • The repair of your machines
  • Intervention planifiée:
  • Targeted maintenance
  • Expertise of your machines

MAINTENANCE


SECMAIR recommends a certain number of preventive actions to keep your equipment in good condition.

A summary table of standard maintenance frequencies is available for download.
We recommend the following main maintenance items to keep your equipment in good condition:

  • Bar maintenance
  • Valve block maintenance
  • Burner maintenance
  • Changing the binder circuit seals
  • Fluid changes (hydraulic oil, thermal, etc.)
  • Test benches
  • Download the document
  • Take photos during maintenance
  • etc.
SERVICE-CENTER_SAV.png
SERVICE CENTER_JUIN2022-21.jpg
SERVICE CENTER_JUIN2022-33.jpg
SERVICE CENTER_JUIN2022-29.jpg

TEST BENCH

1-SPRAYER/RGS benches

2-ACCURACY CHECKS APPROVED FOR COLD-MIX ASPHALT MACHINES

Objectives:

Objectives: 

  • Average dose measurement
  • Transverse spread measurement
  • Instant chip and emulsion flow measurement

Ressource: 3 Approved installations

Ressource:

  • Two static test benches and a mobile test bench
  • Compliant with the NF P 98-726 standard
  • A mobile installation “compliant” with the ZTV BEA-StB 09 and TLG Asphalt-DSK-StB 98/03 standards

Client advantages:

Client advantages:

  • Reduces the risk of a fault that blocks work
  • Increases works quality
  • Saves binder
  • Use and maintenance reminders
  • Reduces the risk of a fault that blocks work
  • Increases works quality
  • Saves binder
  • Use and maintenance reminders
BANC d'ESSAI.JPG
resultats-des-mesures.png

REGULAR GENERAL INSPECTIONS (RGI)

Principle:

  • Standardisation of practises in terms of safety
  • Spreader machines: E5 category
  • 45-item check

> Recommended inspection frequency: 12 months
> Report to be kept for 5 years

extrait-des-points-de-controle-repandeuse_rgs_gravillonneurs-500v.png
SERVICE CENTER_JUIN2022-23.jpg
SERVICE CENTER_JUIN2022-31.jpg
SERVICE CENTER_JUIN2022-27.jpg
SECMAIR_SMARCAB_incrustation.png

RETROFITTING

Objectives:

  • Extend your equipment’s service life
  • Maintain its performance levels
  • Improve its performances (accuracy, energy, …)

TRACEABILITY

One sysytem:

Client benefits:

  • A clear structure
  • Intuitive use
     
  • Quality monitoring for your works
  • Optimisation of site logistics
  • Reduction of inter-works times
  • CE marking: to facilitate the conformity of your Production Control system
  • Inclusion of data in the SIG
  • Differentiation: automatic edition of works reports
1.-tracablite-analyse-des-temps.jpg
1.-tracablite-carthographie-des-travaux.jpg